Copper Pipe Brackets, Copper Pipe Clamps

Copper Pipe Brackets and Copper Pipe Clamps

We are manufacturers, suppliers, and exporters of Copper Pipe Brackets and Copper Pipe Clamps from our precision press shop in India. Our copper pipe brackets and clamps are pressed metal components used to support, secure, and route copper pipework in plumbing, heating, refrigeration, medical gas, and process piping installations. Also known as copper pipe clips, copper pipe saddles, copper pipe supports, copper pipe straps, copper fixing brackets, copper wall brackets for pipe, and copper snap-fit pipe clips, these components are a standard requirement in any copper pipe installation and are specified by plumbers, HVAC engineers, mechanical contractors, and building services engineers worldwide.

Copper pipe brackets and clamps are typically pressed from copper or brass sheet and provide a matching material interface with the copper pipe, eliminating any risk of galvanic corrosion that can occur when copper pipes are supported by steel or aluminium fittings. In building services and domestic plumbing, copper pipe supports must comply with relevant standards such as BS EN 13236 (pipe clip dimensions), and spacing recommendations in BS 8558 and CIBSE guides for copper tube installations.

Types of Copper Pipe Brackets and Clamps We Manufacture

Copper Pipe Clips (Single-Piece Snap-Fit): Single-pressed copper clips that snap around the pipe O.D. and include a fixing hole for screw fixing to walls, joists, or timber backboards. The most common type used in domestic and commercial copper tube plumbing installations.

Copper Pipe Saddles (Two-Piece): Two-part assemblies with a curved saddle body and a back plate, joined by screws or bolts. The saddle wraps around the pipe and the backplate fixes to the structure. Used for larger diameter pipe (28 mm and above) or where greater structural support is needed.

Copper Munsen Ring Pipe Clamps: Split-ring pipe clamps (also known as munsen rings or ring clamps) with a pipe-diameter saddle and a threaded stem for suspension from rod hangers or ceiling trapeze supports. Standard in commercial and industrial plumbing and heating installations.

Copper Half-Shell Pipe Brackets: Half-shell shaped pressed copper brackets used as pipe support saddles in high-temperature heating systems where the pipe must be thermally isolated from the support structure using insulation inserts.

Copper Pipe Suspension Clips: Pressed copper clips for suspending copper tube from overhead structures using threaded rod. The clip wraps around the tube O.D. and has a threaded eye or slotted connection for rod mounting.

Copper Pipe Wall Brackets: Brackets that stand the pipe away from the wall surface, allowing lagging or insulation to be fitted around the pipe, or to accommodate thermal expansion movement along the pipe axis.

Copper Radiator Brackets: Heavy-duty copper pressed brackets for supporting copper-pipework-connected radiators and heat emitters, including adjustable brackets that allow the radiator height and angle to be set during installation.

Pipe Diameter Range

Our copper pipe brackets and clamps are manufactured for all standard copper tube sizes in metric (to EN 1057) and imperial dimensions. Metric tube sizes: 6, 8, 10, 12, 15, 18, 22, 28, 35, 42, 54, 67, 76.1, 88.9, and 108 mm O.D. Imperial tube sizes: 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1.1/4″, 1.1/2″, 2″, 2.1/2″, 3″, and 4″ O.D. Custom diameter brackets for non-standard copper tube or for copper-coated or copper-clad tube can be manufactured on request.

Materials and Finishes

Copper pipe brackets are pressed from ETP Copper (CW004A / C11000) strip in thicknesses from 0.8 mm to 3.0 mm depending on the bracket type and pipe size. Brass brackets for copper pipe (a common alternative) are pressed from CW614N or CW508L brass. Surface finishes available: natural copper (most common for plumbing applications), electro-tinned copper, nickel-plated brass, and chrome-plated brass. All materials are supplied with ROHS compliance and, where required, WRAS (Water Regulations Advisory Scheme) compliance for potable water applications.

Standards and Compliance

Our copper pipe brackets and clips are manufactured to the following references: BS EN 13236 (dimensions and performance of pipe clips), BS 2871 and EN 1057 (copper tube dimensions that define the O.D. for bracket sizing), BS 8558 (guidance for the design, installation, testing, and maintenance of services supplying water for domestic use), CIBSE Guide G (public health engineering — pipe support spacing), and customer-specific standards for medical gas, industrial, and process piping applications.

Manufacturing Process

Copper pipe clips and brackets are manufactured by blanking, piercing, and forming copper or brass strip on progressive press tools. The forming operations create the curved pipe-contact profile, fixing tabs, and snap-fit engagement features in a single multi-stage press cycle. Wall thickness and material temper are selected to provide the correct snap-fit force for the intended application. After pressing, components are deburred and visually inspected. Plated finishes are applied in our controlled electroplating facility. Dimensional inspection covers pipe bore diameter, fixing hole position, and overall bracket geometry.

Applications

Copper pipe brackets and clamps are used in: domestic hot and cold water plumbing, central heating and boiler pipework, underfloor heating manifold connections, commercial HVAC copper pipework installations, refrigeration copper tube runs, medical gas pipeline systems (oxygen, nitrous oxide, compressed air, vacuum), laboratory gas and fluid distribution, fire sprinkler copper pipework, process plant copper tube installations, and marine copper pipe systems.

Related Products and Search Terms

Copper pipe brackets are frequently ordered with: copper compression fittings, copper solder fittings, copper end-feed fittings, brass pipe fittings, copper tube, pipe insulation, munsen rings, pipe hanger rods, threaded rod couplers. Search terms: copper pipe bracket, copper pipe clamp, copper pipe clip, copper pipe support, copper pipe saddle, copper pipe holder, copper munsen ring, copper pipe strap, 15mm copper pipe clip, 22mm copper pipe bracket, 28mm copper pipe clamp, copper pipe support manufacturer India, copper pipe clip exporter, copper snap-fit pipe clip, copper pipe wall bracket, copper pipe suspension clip, WRAS copper pipe bracket, BS EN 13236 pipe clip.

Why Choose Our Copper Pipe Brackets?

We combine three decades of precision pressing expertise with in-house tooling design to offer copper pipe brackets and clamps across the full range of standard copper tube sizes. Our components are manufactured from certified copper and brass materials to relevant standards, and we can supply with WRAS compliance documentation for potable water applications. We export to plumbing wholesalers, HVAC distributors, and building services contractors in the UK, Australia, the Middle East, and Southeast Asia. Flexible order quantities from small development batches to bulk contract supply are supported.

Frequently Asked Questions (FAQ) – Copper Pipe Brackets and Clamps

Why should copper pipe be supported with copper or brass clips rather than steel?

Copper pipe should be supported with copper or brass clips (rather than steel) in corrosive or wet environments to prevent galvanic corrosion. When dissimilar metals are in contact in the presence of moisture, the less noble metal corrodes preferentially. Steel clips in contact with copper pipe can accelerate corrosion of the steel, potentially causing the support to fail. Copper and brass clips are compatible with copper pipe without any galvanic risk.

What pipe sizes do your copper pipe clips cover?

We manufacture copper pipe clips and brackets for metric copper tube O.D. sizes from 6 mm to 108 mm (per EN 1057), and for imperial tube sizes from 1/4″ to 4″ O.D. Custom diameter clips are available for special tube dimensions.

Are your copper pipe clips WRAS approved?

We can supply copper pipe clips manufactured from WRAS-compliant copper and brass materials for use in potable cold and hot water installations. Specific WRAS approvals depend on the full assembly design; please contact us to discuss WRAS documentation requirements for your application.

What is a munsen ring pipe clamp?

A munsen ring (also called a ring clamp or split ring hanger) is a two-part circular clamp with a threaded stem, used to hang pipes from ceilings or overhead structures via threaded rod. The ring wraps around the pipe O.D. and the stem connects to a hanger rod, allowing the pipe to be suspended at the required height and position.

Can you supply copper pipe brackets for medical gas installations?

Yes, we supply copper pipe supports specifically for medical gas pipeline installations, manufactured from materials conforming to HTM 02-01 (UK Health Technical Memorandum) requirements for medical gas pipeline systems. These are produced from approved copper and brass materials without any contaminating lubricants.

Do you supply copper pipe brackets for underfloor heating?

Yes, we supply copper pipe clips and support saddles for underfloor heating copper tube manifold connections and distribution pipework. These are typically snap-fit or two-part clips in the 10 mm, 15 mm, and 18 mm sizes most commonly used in underfloor heating circuits.

What is the minimum order for copper pipe brackets?

For standard stocked sizes, minimum order is 100 pieces per size. For custom sizes or speciality finishes, minimum order is 500 pieces. Sample quantities for approval testing are available.

Do you export copper pipe brackets internationally?

Yes, we export copper pipe brackets and clamps to plumbing distributors and building services suppliers in the UK, Australia, UAE, South Africa, New Zealand, and Southeast Asia. All exports include full compliance documentation.

Request a Quote for Copper Pipe Brackets and Clamps

Sourcing Copper Pipe Brackets, Clips, or Munsen Ring Clamps for your plumbing, HVAC, medical gas, or building services project?

📧 Email us at: sales@brass-copper-parts.com with tube O.D. sizes, pipe clip type, finish requirements (WRAS, standard, or plated), and required quantities

📱 WhatsApp/Call: +91-22-43449300 for technical support on copper clip selection, compliance documentation, and delivery scheduling

🌐 Visit our facility: See our copper pressing and forming operations for pipe clips and brackets and discuss WRAS material compliance

📋 Request samples: Standard copper pipe clips for 15 mm, 22 mm, and 28 mm tube are available for immediate evaluation and site approval testing

Brass & Copper Parts supplies copper pipe brackets, clips, and saddles to plumbing wholesalers, HVAC contractors, and building services suppliers across the UK, Australia, the Middle East, and beyond. Contact us today for competitive pricing and compliant supply.